What Happens When A Projector Overheats?
Projectors are known for their great cost-performance ratio, but this stellar performance comes with a downside. These electrical appliances can succumb to overheating and burnout when they’re in continuous use for periods of more than 3 hours. When a projector overheats, thermal switches will shut them down to prevent extensive damage to the internal components. After the projector cools to a certain temperature, it will start up again. The process may repeat many times until the fan stops running at all and locks up.
A burning smell indicates that your projector may be overheating. If this happens, stop using it immediately and keep it away from anything that can catch fire. A burning smell may also indicate that the projector has other internal problems such as an electrical short circuit. If you smell a burning smell, it is best to consult your local electronics store for diagnosis and repair.
Possible Causes Of Overheating
1. Excessive Fan Usage
This is the most common cause of overheating in projectors. If the projector is left in operation for long periods of time, the internal temperature begins to rise. As a result, the fan will be used more frequently to maintain cooling. This will cause it to wear out faster and burn out sooner as well.
2. Internal Electrical Short Circuit
Electrical shorts occur when the projector has been damaged and some of the internal components are touching or short-circuiting. For example, if a fan becomes loose inside or a loose screw or pin holds it together, electrical shorts occur and cause overheating.
3. Excessive Dust And Debris
Dust can get into the projector and cause overheating. To prevent this, it’s best to use a clean room to house your projector so that dust can’t get in easily. If dust builds up inside your projector, you should remove and clean the fan blades and other internal parts carefully.
What You Can Do To Prevent Overheating
1. Use Cases, Covers And Filters
Use cases and covers to protect your projector from dust, heat, and other sources of damage. It’s also recommended to use a filter so that air flow within the case is not restricted and there is enough room for airflow from fans.
2. Keep It In A Well Ventilated Area
A projector that is being used at high capacity will naturally produce a lot of heat. If the area it is stored in is not well ventilated, the temperature will increase and make the fan cycle quicker.
3. Turn Down The Brightness
If your projector has a brightness control, turn it down to reduce the temperature. This will also help to decrease the noise from the fan cycle. Alternatively, use an external device that will dim your projector’s brightness level automatically.
Tips To Elongate The Projector’s Life
1. Avoid placing the projector near an open window or vent that can allow dust to enter the case.
2. Turn off your projector when you are not using it, as this will reduce unnecessary heat buildup within the case.
3. Clean your fan regularly to prevent dust and other debris from clogging up internal parts.
4. Don’t use plastic bags within the projector case as this will restrict airflow and increase the temperature.
5. Use a high-quality filter and don’t remove it unless you are advised to do so by an expert technician.
Overheating is a serious problem for projectors. It’s important to take preventative measures and prolong the life of your projector by keeping it away from sources of heat, dust and other contamination. If you follow these tips and practice safe use, your projector will keep on working at its best for a long time to come.